Application of
WOODS™ New Wood Conditioner

Supplies
WOODS™ New Wood Conditioner Synthetic Brush or Roller Eye protection	Bucket Water supply Hose Soft synthetic scrub brush

General Application

• For heavy duty cleaning, add contents to 3 gallons (12 litres) of warm water and mix thoroughly. For light cleaning, add contents to 5 gallons (20 litres) of warm water and mix thoroughly.
• Apply liberally with a brush or roller to saturate the surface.
• On vertical surface start from the bottom and work your way to the top - this will prevent water staining.
• For heavy duty cleaning, allow to stand 15 - 20 minutes. For light cleaning, allow to stand 5 - 15 minutes.
• Rinse thoroughly with water while scrubbing with a soft synthetic bristle brush. Be sure to rinse all the WOODS™ Exterior New Wood Conditioner out of the wood.
• Allow to completely dry for 1 week in dry weather.
• If there is a white residue on areas of the wood, another thorough rinsing is necessary with the appropriate drying time.
• A light sanding may be required if a smooth surface is desired.
• Rinse after sanding.

THE NATURAL STAIN COMPANY OF CANADA INC. encourages all users of our products to email or call us if you have any application questions and/or problems. No question or problem is too small or too big.

For more information, please download our info kit or call:

1 800 267-8246