Application of
WOODS™ Interior Gold-Brand Urethane

 

Supplies
WOODSä Interior Gold Urethane Roller or airless sprayer Eye protection Natural bristle brush	Rubber gloves Soft cloth Cool  water for cleanup Fine sand paper (220)

Staining Tips

• Do no dilute any of these products.    
• Work from the bottom up.
• Store unused products in airtight container.
• Varying grain and density of the wood will affect the texture of the finish.
• The surface must be dry and free of dirt, dust, oil, grease, wax, rust, mildew and any other surface contamination.

Application

Three Simple Steps

• Step 1 - Prepare
  • Two to four coats are recommended.
  • It is recommended that the project be broken down into small workable areas.

   

• Step 2 - Protect
  • Apply WOODSä Interior Gold Urethane with application tools designed for the size of the area.
  • Apply an even coat working from end to end following the grain.
  • Once WOODSä Interior Gold Urethane has started to dry, do not re-work as this will cause a seedy effect.
    
  • Allow four hours of drying time before applying a second coat.
  • It may be necessary to sand lightly after the first coat has completely dried.

   

• Step 3 - Preserve
  • To maintain, simply clean surface with soap and water or a urethane safe wood floor cleaner.
  • If another coat is desired in high traffic areas, simply clean the floor, let dry and then apply one to two coats following the directions in Step 2.

 

THE NATURAL STAIN COMPANY OF CANADA INC. encourages all users of our products to email or call us if you have any application questions and/or problems. No question or problem is too small or too big.

For more information, please download our info kit or call:

1 800 267-8246